M-3V Solenoid Valves

Bronze · 1/8″- 2″npt
Normally Closed
Viton Leak Proof Seat
Air/Water·Inert Gas·Light Oils
5-125psi OR 10-250psi
Media temps to 220°
NEMA 4X Watertight Coil Standard
120,240,480,120/240 (50/60hz)

$203.00$985.00

Clear
View cart

Product Page

General Specifications

  • General Purpose Valves
  • Internal Piston-Pilot Operated
  • Positive Shutoff
  • 2-Way
  • Full Ported
  • Packless
  • Bronze Body
  • Normally Closed (Energize to Open)
  • UL listed:  General Purpose

SERVICE RATINGS

  • Pipe Sizes Available: 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1¼”, 1½”, 2” NPT (Must Specify)
  • Media:
    • Water & Aqueous Liquids
    • Air
    • Inert Gases
    • Light Oils (Max Viscosity – 15W SAE, 225 SSU)  & other non-volatile; non-corrosive fluids
  • Pressure Range:  5 – 125 psi   OR 10-250psi
  • Minimum pressure drop of 5 or 10 psi (ΔP) required for proper operation.   For optimal valve operation, specify your actual pressure range.

Select the Maximum Pressure Rating closest to but not exceeding the actual pressure under which the valve will operate
(Example: offered ranges are 5-50 psi or 5-125 psi. Your steam application has a Maximum Pressure of 75 psi > pick the 5-125 psi rated valve.)

 Consult our Valve Specialists with@ 800.634.6853

  • Rated Fluid Temperature Range: -40° F to +220° F
  •  Voltages Available (Please Specify):
  • ul  listed 24, 120, 240, 480 or Dual Voltage: 120-240 VAC 50-60Hz
  • Maximum Watts:  ul  26 Watts
  • Coil Specifications: NEMA 4X  Waterproof Corrosion Resistant Coil – Continuous Duty Polyester, Thermoset Epoxy Molded with 18” Leads and ½” Conduit Connector
  • Insulation: Class H (220°F Maximum Fluid Temp @ 77°F Ambient)

Valve Construction

    • GLOBE BODIES are Sand Cast Bronze – Max Rated Pressure: WSP 200 – WOG 400
    • BONNET ASSEMBLIES are 304 SS Tubes with Brass Tube Plugs Silver-soldered to a Brass Bonnet. BONNET O-RING is Buna.
    • PISTON ASSEMBLIES are Brass with Brass SEAT SCREWS with a Viton® Insert and 316SS EXPANDER RINGS behind Glass & Moly-Filled Teflon® PISTON RINGS plus Buna SEAT DISC and Brass or Bronze GUIDE NUT.
    • PILOT VALVE is 416SS and PISTON SPRING is 303SS.

      MOUNTING & SERVICE

    • Installation: Valves must be mounted in horizontal pipe with coil vertical, upright and on top. A 40–mesh inline strainer is recommended ahead of the valve.
    • Maintenance: As with any piece of equipment, reasonable inspection and maintenance of components should be periodically performed. Frequently check operation, cleanliness and internal wear. Any questions, consult factory.

NOTE: Gould Solenoid Valves are designed for Industrial–Commercial applications. Residential/Consumer applications will void the warranty. Questions ~ Call our Experts.

Spec Sheet and Drawings

BULL-120-M March 2018

CAD Drawings

You may also like…

  • M Series Solenoid Valve Coils

    This is a replacement coil for Gould M-Series Solenoid Valves. Select the appropriate voltage.

  • M-3V Rebuild Kits

    Rebuild Kit contains complete internals
    Can rebuild valve while still in line
    New Piston Assembly
    New Pilot Assembly
    New Piston Spring
    All applicable seals