DL & DL-2

Bronze · 3/4″ – 2″ npt
Adjust Closing Speed · Manual Open
Flow Control Adjustments
Normally Closed · Temps to 300°
Water · Liquids · Oils to 700psi
Air · Inert Gas to 400psi
NEMA 1 Coil Enclosure Standard
NEMA 4,5,7 also available
All Voltages available

$934.00$2,119.00

Clear
View cart

Product Page

General Specifications

  • Heavy Duty General Purpose Valves
  • Normally Closed (Energize to Open)
  • 2-Way
  • Full Ported
  • Bronze Body
  • Flow Control Adjustments
  • Manual Open
  • Adjustable Closing Speed
  • Internal Piston-Pilot Operated
  • Teflon® Leakproof seat provides Positive Shutoff

SERVICE RATINGS

  • Pipe Sizes Available (Must Specify):  3/4″, 1″, 1 1/4″, 1 1/2″, 2″ NPT
  • Media:
    • Water
    • Light Oils (Max Viscosity – 10W SAE, 200 SSU) & other non-volatile; non-corrosive liquids
    • Oils (Max Viscosity 30 SAE or 400SSU)
  • Pressure Range10-700 psi  
    • For optimal valve operation, specify your actual pressure range.  A minimum pressure drop of 5 psi (ΔP) is needed for proper operation.

Select the Maximum Pressure Rating closest to but not exceeding the actual pressure under which the valve will operate (Example: offered ranges are 5-150 psi or 10-400 psi. Your water application has a Maximum Pressure of 60 psi > pick the 5-150 psi rated valve).

For more details email [email protected] or Consult our Valve Specialists @ 800.634.6853

  • Rated Fluid Temperature Range: -40° F to +300° F
  • Voltages Available (Please Specify): 
    • 12, 24, 120, 240, 480 VAC  50-60Hz 18 Watts Max
    • 6, 12, 24, 48, 115, 230 VDC 24 Watts Max
  • Coil Specifications:
      • NEMA 1 Standard
      • -2 indicates NEMA 4 Water Tight, NEMA 5 Dust Tight & NEMA 7 Explosionproof Coil Enclosure for Hazardous Locations: Class I Group D; Class II Groups E, F & G

Valve Construction

  • BODIES are Sand Cast Bronze. Max Rated Pressure: WSP 200 psi – WOG 1200 psi.
  • BONNET ASSEMBLIES are 304 Stainless Steel (SS) Tubes with Brass Tube Plugs silver-soldered to a Brass Bonnet.
  • ADJUSTMENT STEM ASSEMBLIES for Closing Speed & Manual Open are 303SS & Brass with Graphite Packing and Brass Retainer.
  • PISTON ASSEMBLY is Brass with Brass SEAT SCREW. 316SS EXPANDER RING behind Glass & Moly-Filled Teflon® PISTON RING plus Buna SEAT DISC and a Brass DISC SCREW.
  • PILOT VALVE ASSEMBLY has a 416SS ARMATURE with a 303SS PILOT POINT and 316SS PINS. PISTON SPRING is 302SS.

MOUNTING & SERVICE

  • Installation: Valves must be mounted in horizontal pipe with coil vertical, upright and on top. A 40–mesh inline strainer is recommended ahead of the valve.
  • Maintenance: As with any piece of equipment, reasonable inspection and maintenance of components should be periodically performed. Frequently check operation, cleanliness and internal wear. Any questions, consult factory.

NOTE: Gould Solenoid Valves are designed for Industrial–Commercial applications. Residential/Consumer applications will void the warranty. Questions ~ Call our Experts.

You may also like…

  • DL & DL-2 Rebuild Kits

    Rebuild Kit contains complete internals
    Can rebuild valve while still in line
    New Piston Assembly
    New Pilot Assembly
    New Piston Spring
    All applicable seals

  • Q/K/B/D Series Solenoid Valve Coils

    This is a replacement coil for Gould Q/K/B/D -Series Solenoid Valves.

    (XS)= extra strong (HT)= High Temp

    Select the appropriate voltage.